Re: Brakes not completely releasing
Quote:
Originally Posted by 311-420
If this is for the rear, make sure you aren't using gt pads by accident. They're thicker than mach/cobra pads and will drag on the thicker/vented mach/cobra rotors.
|
And that the slots in the piston are vertical so as to line up with the tits on the back of the pads.
__________________
2003 Azure mach1 5 speed with IUP
Maximum Motorsports R&T Box with Torque Arm and lots of other bits and pieces here and there
2012 Candy Red Metalic Premium GT with Brembo/Trak Pak and 373s
HPDE Instructor
|