View Single Post
Old 10-15-2018, 07:04 PM   #48
TKat13
Mach-T
 
TKat13's Avatar
 
Join Date: Jun 2004
Location: DFW
Posts: 2,865
Re: Radiator fan help..electrical aspect

Larry, you can do the compression test/leak down test yourself, it really is easy and a really good tool to have with boosted motors. Mine passed the gas test but failed the leak down test, most cylinders were 5-8% and two were 39%.

Before you go pulling the trans; jack up the car, remove the inspection cover on the trans and run a scope up there and look at the freeze plug; heck, look with it under pressure. Not sure why the heck a mechanic would not offer that; with a lift it is a matter of minutes. (another good tool to have). You can get them cheap on amazon these days.

I just fully yanked my motor out so if you need pics of anything let me know.
__________________
Darrell
Black '04 Mach 1
Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67
(100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88
New build - 750rwhp; not track tested (yet)
Mods: Build Log
Paint&Body
Tuned by Manny @ HPP
TKat13 is offline   Reply With Quote