|
Re: Mac TK9634
I don't have the 3" but I may be able to help you some. I have the TK8604 2.5" and I had the same issues with the over the axle pipes. What solved it for me was to loosen the pipes ahead of the mufflers and rotate those pipes slightly while pushing up on the mufflers to get them as high up as possible. Also make sure that you don't have those pipes on the wrong sides (left one on the right side and vice versa). Start with getting those mufflers up high and not hitting the rails and work your way back. It's gonna take you some time but it's worth it.
__________________
2003 TR Mach 1 5-Spd Non-IUP
#108 of 9652
Dyno tuned, C&L 85mm CAI, MRT Catted H, Mac SS Catback, JLT Oil Separator, MGW Short Throw/Orange handle, Rich1's Shaker Air Diverter, Fiore Clutch Quad/FWA, AFS Mach 1 MAC Black Replicas 17X9/10.5, Nitto NT555 G2's in 275/315, Steeda (Sport Springs, Bumpsteer Kit and X2's), Tokico Blues, 2003 Cobra Clutch, Explicit Auto's Aluminum Finish Retro Rings, IUP upgrades, Craig's No Drill LP Bracket, MGW Satin Finish Interior Bling, Web Electric Sequentials
|