|
Re: Kicking Off another Mach 1 Motor Build
Quote:
Originally Posted by nickmckinney
TSS oil pump
3V windage tray
Oversized valves do not fit 03+ C heads unless you also install oversized seats. The stock valve seat is the same diameter as the valve so you can't go any bigger like on the 2V heads.
|
Do you have a picture of that windage tray?
__________________
RIP - Destroyed August 15, 2015
Motor + Procharger + driver = Baddest hillclimbing Mach 1 in the country
Mustang dyno: 538hp/481tq @ 14lbs/19deg timing
DynoJet comparison: 600hp/539tq
Looking for more hillclimbers!
|