View Single Post
Old 06-11-2018, 06:24 PM   #15
TKat13
Mach-T
 
TKat13's Avatar
 
Join Date: Jun 2004
Location: DFW
Posts: 2,865
Re: Removing Engine - Need advice on alternator and wiring harness

I just wiggle back and forth with some force pulling up at the same time. You can wrap a lifting strap (cloth) around the tubing, hook to your engine hoist and add slight tension, then wiggle back and forth. I would not be surprised if you find that your cross-over is in need of being replaced, that thing is very rusty!
__________________
Darrell
Black '04 Mach 1
Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67
(100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88
New build - 750rwhp; not track tested (yet)
Mods: Build Log
Paint&Body
Tuned by Manny @ HPP
TKat13 is offline   Reply With Quote