Re: Need 2 upper control arm bolts: PLEASE HELP
1/2" bolts are too big for the stock stuff. That is what I took off, TeamZ arms. I tried to use The grade 8 bolts with those arms and too big. From what I found out at the hardware store the correct size is 12mm but even they had a very slight wobble which could cause damage over time. So I'm not 100% sure what the stock bolts are.
__________________
03 white Mach1
JLT RAI | 1/2 spacer | Catback | 4.56s
7.76@87.8mph
|