2003-04 Mach 1 Registry Owners Club - View Single Post

birdman941 · 11-06-2006, 08:26 PM

It will have a forged crank.
Manley rods.
Forged pistons (whatever Al Pappito aka Boss330 recommends for 11:1)
AP recommended camshafts
AP ported 03/04 Mach/Cobra heads
Billet oil pump gears
Accufab Trigger wheel (though I was going to say TB didn't you?)
Probably a stock Mach/Cobra pan-pickup
Custom intake (mate!)
FRPP Aluminum FW w/ Terminator clutch disc and plate
2000 "R" spec FRPP T-56 trans
AP expects roughly 400 + streetable RWHP.

11-06-2006, 08:26 PM	#14
birdman941 Torque wins! Join Date: Dec 2004 Location: Florida Posts: 13,167	Re: New Project "R" thread It will have a forged crank. Manley rods. Forged pistons (whatever Al Pappito aka Boss330 recommends for 11:1) AP recommended camshafts AP ported 03/04 Mach/Cobra heads Billet oil pump gears Accufab Trigger wheel (though I was going to say TB didn't you?) Probably a stock Mach/Cobra pan-pickup Custom intake (mate!) FRPP Aluminum FW w/ Terminator clutch disc and plate 2000 "R" spec FRPP T-56 trans AP expects roughly 400 + streetable RWHP. __________________ The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno Last edited by birdman941; 12-13-2006 at 06:27 PM.