View Single Post
Old 03-26-2018, 12:45 PM   #5
TKat13
Mach-T
 
TKat13's Avatar
 
Join Date: Jun 2004
Location: DFW
Posts: 2,865
Re: Have a question about my door speakers and FAD/Balanace

I'd like to help, but not sure if I fully understand how your setup is different from the stock. Meaning...
1. Are you door and rear deck speakers stock?
2. Do you still have the rear deck mounted amps?
3. what wiring have you done; sounds like you have installed an amp in the truck?
4. 4 amp fuse? must be a type?
5. Have you changed any of the speaker wiring to the rear deck and/or door speakers? If so, what
6. Sounds like you installed head unit; how was the speaker outputs wired up? Meaning, in a normal install, you would / could wire in the 2.5" speakers in the door pods and rear deck to the deck's power output level. Then the sub out should be wired to the rear amps. Of course, you must have a lowpass and high pass crossovers configured in your head unit, otherwise you will blow those little 2.5" speakers. So, knowing how your head unit is wired would be huge in this case.
7. What wire kit did you use on your head unit?
__________________
Darrell
Black '04 Mach 1
Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67
(100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88
New build - 750rwhp; not track tested (yet)
Mods: Build Log
Paint&Body
Tuned by Manny @ HPP
TKat13 is offline   Reply With Quote