2003-04 Mach 1 Registry Owners Club - View Single Post

Phil · 07-20-2006, 01:58 PM

The 5 smaller brake line ports on the ABS pump are 10m x 1.0 and the one larger right rear brake line port is 12m x 1.0 I made a small manifold/junction box out of T-6061 and will install later on today..

I just copied how the top of the ABS pump is with the 4 brake lines on top & the 2 master cylinder lines on the side. The ABS pump is labled LF, RF which is the 2 bottom ports (looking at the 1st pic). LR, RR are the 2 top ports, RR being the larger port.
I will see how the brakes work and I may have to install a manual brake proportional valve off the MC if I start to lock up the front skinnies..

07-20-2006, 01:58 PM	#11
Phil Nitrous Junkie Join Date: Jul 2003 Location: Ohio Posts: 7,299	Re: Anyone remove the ABS Bosch pump? The 5 smaller brake line ports on the ABS pump are 10m x 1.0 and the one larger right rear brake line port is 12m x 1.0 I made a small manifold/junction box out of T-6061 and will install later on today.. I just copied how the top of the ABS pump is with the 4 brake lines on top & the 2 master cylinder lines on the side. The ABS pump is labled LF, RF which is the 2 bottom ports (looking at the 1st pic). LR, RR are the 2 top ports, RR being the larger port. I will see how the brakes work and I may have to install a manual brake proportional valve off the MC if I start to lock up the front skinnies.. Attached Thumbnails __________________ Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ Last edited by Phil; 07-20-2006 at 03:33 PM.