2003-04 Mach 1 Registry Owners Club - View Single Post

FenixFallen · 07-04-2018, 10:44 AM

Finally got the supercharger cams, took a lot longer than I wanted. These are available now. here are some pics.

There is some slight surface rust in a few spots, perhaps there wasn't enough assembly lube used. I have cleaned them up some with neveRdull and re-coated them with assembly lube, wrapping them in the packaging the new ones came with.

07-04-2018, 10:44 AM	#3
FenixFallen Newb Join Date: Nov 2011 Location: Barre, Vermont Posts: 206	Re: MHS stage 3 Turbo 4v cams Finally got the supercharger cams, took a lot longer than I wanted. These are available now. here are some pics. There is some slight surface rust in a few spots, perhaps there wasn't enough assembly lube used. I have cleaned them up some with neveRdull and re-coated them with assembly lube, wrapping them in the packaging the new ones came with. __________________ Black 2003 Mach 1, 483hp/451tq @6100 8.9psi -Stock longblock, stock transmission, Procharger D1SC 4.15" pulley, Accufab 60mm TB, P/P intake manifold, full MAC exhaust, return style fuel system, Maximum Motorsports/Steeda suspension, Torsen T2R 31 spline diff Red 2007 Focus ST, daily driver, 236hp/234tq @10psi -FSWerks gt2871r kit, Cosworth intake manifold, FSWerks Stealth exhaust, FRPP lowering springs Last edited by FenixFallen; 08-15-2018 at 08:51 AM. Reason: adding pics