[rcodemach1]

Ck out the power #s above. No power loss down low, so I would think it won't have any issues. Should be awesome with your exhaust setup, but you probably need to get the intake ported to take full advantage of the new parts. 'Course you'll need a non-painted cowl hood too.

I'm not worried about porting my own heads so I might be able to get by with getting just the cams. But I'll have to open up my intake some more, since I smoothed out the lid and upper part of the intake but didn't do much in the bottom (removed the plugs but didn't cut the bottom off this time).