Thought I'd Share A Little Side Project
*Disclaimer - I do not use this on public roads nor do I condone doing so.
This is the second 'prototype' I've been working on for a while. Uses an Arduino and a small digital servo that cranks out a ton of torque. The small wires just above the star are the extension to control it from the center console.
__________________
No accident that my birthday is March 1st. Take out the 'r' and you end up with....
2003 Torch Red Mach 1
★ Rebuilt 3650 & MGW
★ Spec 2 & Fidanza flywheel
★ H&R Super Sports & Maximum Motorsports struts/shocks
★ Maximum Motorsports rear lowers, MM panhard, MM caster camber plates
★ Mosers + ARPs
★ Brembo slotted rotors, braided lines
★ Catless X and SLP LM2s
★ 18X9/10.5 - Toyo R888R
|