Re: Oil Filter Adaptor Gasket - sealant?
Quote:
Originally Posted by USMCWeatherMan
This is a pretty straight forward job. Not sure about crimping or plugging the rad hose....I just let it drain. You shouldnt loose a whole lot.
No other accessories should need to be removed. Just drain your oil, remove the oil filter, disconnect the radiator hose and let that drain. Remove the adapter, replace the gasket, reconnect rad hose, put on new oil filter (or reuse the old one if relatively new). Refill engine with oil.....then burp your coolant system. Search the forums....the proper steps are somewhere in here.
|
Why do you have to drain the oil?
__________________
2003 Azure mach1 5 speed with IUP
Maximum Motorsports R&T Box with Torque Arm and lots of other bits and pieces here and there
2012 Candy Red Metalic Premium GT with Brembo/Trak Pak and 373s
HPDE Instructor
|