View Single Post
Old 09-27-2018, 01:32 PM   #15
311-420
Can't be bridled
 
311-420's Avatar
 
Join Date: Sep 2007
Location: Texas
Posts: 7,006
Re: Battery to power distribution voltage drop issue

Quote:
Originally Posted by texas_snake View Post
There should be a very small part number on them on the side (might have 2 different numbers on each side). Try googling them and see what turns up. Aftermarket injectors might come in different colors. But from what I saw when checking into it, many try to stick to ford colors. The colors might change based on model (ev*), but we should be EV6.

So likely they are 24 lb injectors that were replaced with aftermarket. I believe Bosche was the original maker.
Here is a good link on mustang injectors.

https://lmr.com/products/mustang-fue...tor-size-chart
Just making sure the rest of your injectors weren't wrong too. The factory set is definitely black, so when you said green and were already dealing with mismatched stuff...well..it just doesn't make too much sense to swap factory injectors with aftermarket ones that are supposed to be the same size. But who knows what the po was thinking.
__________________
2004 Mach 1 #6956 5spd w/IUP
Eaton swap, longtubes, built 3.73 SRA
452hp/409tq dynojet🏁
311-420 is offline   Reply With Quote