[tmhutch]

Originally Posted by DanB

Look not trying to sound like an Richard but here are the facts!!!!!!



This is wrong!!!! Just to state the obvious here when you removed your heads and had bronze guides installed the machine shop also did a valve job to insure that the valve sealed after the new guides, when they tore in to the heads the also milled the bottom ( also known as the deck surface) in order to make it smooth enough for a MLS gasket to reseal when you mill a head you are making more cylinder pressured because the combustion part of the head is closer to the piston thus means less square area in turn adds more pressure to the piston thus stabilizing the piston to one side or the other (it Dampens to noise). The noise is actually still there it is just that you cant hear it due to added pressure. On a cobra it gets real bad because of the cylinder pressure they have due to the supercharger that is why it is more prone when idle and not under high boost. there is already enormous pressure on top of the piston so the clearance on a forced induction would have to be enormous for you to hear when the car is pullied and under pressure. That is why you hear it loudly when at idle due to less pressure