2003-04 Mach 1 Registry Owners Club - View Single Post

gfong · 09-11-2019, 01:22 PM

Selling my 2003 Mach 1. It is in Ontario, Canada and I am selling it for $21,300 Canadian which is approximately $16,000 USD.

Bought new, one owner, never smoked in, low kms/mile...56,000 kms/35,000 miles no accidents, original paint.

Some of the guys and gals on here have seen the car in person through the years as I attended Mustang Alley at Woodward Dream Cruise in Detroit Mi numerous times throughout the last 12 years.
Back in 2006 or 2008 my car won best street/strip car in Mustang Alley at the Woodward Dream cruise!

So what do we have here!

Full disclosure the car has been raced by me and some of it is documented on the this site along with most of the modifications that I have done to the car. Included will be approx 80% of the OEM parts that came off the car. I do not have original tires/rims or the exhaust from the mufflers back.

Engine/Power:
Comp Cam's PN #106400
Comp Bee Hive Springs PN #26123-32
Roy's Ported & Polished Lower Intake
PHP Intake Spacer
90mm MAF
JLT RAI
Accufab Dual 60mm Throttle Body
SLP Long Tube Headers
SLP Catted X Pipe
SLP Loudmouth 1 Cat back
Moroso 7qt Oil Pan
Stewart/EMP HP Water pump
4.56 Motive Gear
TA Performance Axle Girdle
Moser 31 Spline Axles
Detroit Truetrac diff
Zoom HP Clutch
Zoom Aluminum Flywheel
FRPP Aluminum Driveshaft

Suspension:
PA Racing Mild Steel K-Member
Lakewood 90/10 Drag Struts
KYB AGX Adjustable Rear Shocks
Steeda Caster Camber plates
Steeda SuperLite Front Drag Race Springs/ Stock springs as well.
15 x 4 Centerline Convo Pros (street)
Mickey Thompson Sportsman SR's (Radials) street use
15 x 8.5 Centerline Convo Pros (street)
Nitto 555R 275/50/15 Drag Radials street use
15 x 4 Centerline Warriors (track use only)
15 x 8.5 Centerline Warriors (track use only)
Hoosier Drag Slicks 26x10x15 (track use only)
Hoosier Drag Front 26.0/4.5-15 (track use only)
Steeda Full Lenght Sub Frame Connectors (welded)
FRPP Drive Shaft Loop
Steeda Aluminum LCA's
Steeda HD UCA's
Swarr Axle Bar
Rear Seat Delete

Misc
SLP Line Lock
Hurst Sidewinder Shift knob with 12v button to work Line lock
MSD 2-Step Launch Control PN 8734
MSD #8963 Programmable Shift Light
MGW Shifter
SCT X2 Tuner
Dyno tune by Alternative Auto Performance (Michigan)
Some shiny pieces as well!

400 hp runs high 11's low 12's all day and then turn the A/C on for the drive home!

No trades any comments welcome. Thanks for reading.

09-11-2019, 01:22 PM	#1
gfong Greg Fonger Join Date: May 2004 Location: Ontario, Canada Posts: 3,416	Ontario Canada 2003 Mach 1 Selling my 2003 Mach 1. It is in Ontario, Canada and I am selling it for $21,300 Canadian which is approximately $16,000 USD. Bought new, one owner, never smoked in, low kms/mile...56,000 kms/35,000 miles no accidents, original paint. Some of the guys and gals on here have seen the car in person through the years as I attended Mustang Alley at Woodward Dream Cruise in Detroit Mi numerous times throughout the last 12 years. Back in 2006 or 2008 my car won best street/strip car in Mustang Alley at the Woodward Dream cruise! So what do we have here! Full disclosure the car has been raced by me and some of it is documented on the this site along with most of the modifications that I have done to the car. Included will be approx 80% of the OEM parts that came off the car. I do not have original tires/rims or the exhaust from the mufflers back. Engine/Power: Comp Cam's PN #106400 Comp Bee Hive Springs PN #26123-32 Roy's Ported & Polished Lower Intake PHP Intake Spacer 90mm MAF JLT RAI Accufab Dual 60mm Throttle Body SLP Long Tube Headers SLP Catted X Pipe SLP Loudmouth 1 Cat back Moroso 7qt Oil Pan Stewart/EMP HP Water pump 4.56 Motive Gear TA Performance Axle Girdle Moser 31 Spline Axles Detroit Truetrac diff Zoom HP Clutch Zoom Aluminum Flywheel FRPP Aluminum Driveshaft Suspension: PA Racing Mild Steel K-Member Lakewood 90/10 Drag Struts KYB AGX Adjustable Rear Shocks Steeda Caster Camber plates Steeda SuperLite Front Drag Race Springs/ Stock springs as well. 15 x 4 Centerline Convo Pros (street) Mickey Thompson Sportsman SR's (Radials) street use 15 x 8.5 Centerline Convo Pros (street) Nitto 555R 275/50/15 Drag Radials street use 15 x 4 Centerline Warriors (track use only) 15 x 8.5 Centerline Warriors (track use only) Hoosier Drag Slicks 26x10x15 (track use only) Hoosier Drag Front 26.0/4.5-15 (track use only) Steeda Full Lenght Sub Frame Connectors (welded) FRPP Drive Shaft Loop Steeda Aluminum LCA's Steeda HD UCA's Swarr Axle Bar Rear Seat Delete Misc SLP Line Lock Hurst Sidewinder Shift knob with 12v button to work Line lock MSD 2-Step Launch Control PN 8734 MSD #8963 Programmable Shift Light MGW Shifter SCT X2 Tuner Dyno tune by Alternative Auto Performance (Michigan) Some shiny pieces as well! 400 hp runs high 11's low 12's all day and then turn the A/C on for the drive home! No trades any comments welcome. Thanks for reading. Attached Thumbnails Last edited by gfong; 09-06-2020 at 08:03 AM. Reason: Additions