|
Re: Installing MSD Digital Window Switch
Quote:
Originally Posted by grey03mach1
I see. So the yellow wire is what actually enables and disables the n20. So can I ground the switch by the ecu (the ecu's ground), get 12 volt source from relay, white to #26 pin and yellow to ground of n20 solenoid?
|
Not the solenoid, but the low amp side of the relay which controls the power to the solenoid.
If you ground the solenoid through the yellow wire you will blow up the window switch.
Tony
__________________
2015 Ruby Red Mustang GT Premium
Bone Stock
03 Oxford White Mach 1 - SOLD
1.72 60',10.932@131.60MPH, 3800# Raceweight
|