|
Re: BBK Dual 65mm Throttle body review
Quote:
Originally Posted by 305HP
I'm getting rid of an Accufab. No matter what I do it keeps giving me a hanging RPM after its heats up and it seems to be totally random, I have to blip the throttle or it will raise itself to 2500rpm.
|
look here:
http://www.mach1registry.org/forums/...ad.php?t=18330
Quote:
Originally Posted by labelblack68
i have set the voltage on my accufab Tb, nothing different, and made restrictor plate, only thing that changed was now hangs at 1600 until i blip the throttle, now i have blocked the iac and unplugged it and adjusted the idle screw so it would idle with the iac unplugged and the car hangs at 1100 rpm untill the car completely stops moving and cuts down to 900 rpm when it up to temp. i have cams in my car does this make a difference?
|
you might have to open up the hole in the restrictor plate.
http://www.mach1registry.org/forums/...&postcount=231
__________________
2003 Mach 1 IUP
Azure Blue
DOB: 7/28/03
Magnapack Cat-back, Bassani Catted X-pipe, C&L intake, MGW shifter, MM FLSC, MM Alum steering rack bushings, MM S/S brake lines, MM C/C plates, MM Panhard Bar, H&R Race springs, Blistein HD's, Steeda 2pt STB, Moser 31-spline axles, and S197 posi
|