[shake this]

So I just got a list if goodies from the machine shop and wanted to make sure we were missing anything or have any foreseeable issues before I give them the green light.

Donner is a Teksid block from a 1995 Lincoln Mark 8

Engine Block Cleaned
Engine Block Magnufluxed for Cracks
Engine Block, Cylinders Bored .020
ALIGN HONE MAINS
BHJ Torque Plate Hone .020 Digitally Balanced Rotating Assembly Internally balanced
Pistons Mounted on Connecting Rods
Crankshaft Grind .STD/.010
Crankshaft Polished and Vat Cleaned .STD/.010
Cylinder Heads Cleaned
Valve Job
Head Surfaced
CR868XPN .010TRI METAL ROD BEARINGS
MB5283XP STD TRI METAL MAIN SET
10227 MELLING HV OIL PUMP
HS26187PT HEAD GASKET SET
CS9790-4 LOWER GASKET SET
14042-8 Connecting Rods, 4340 H-Beam, Cap Screw, Bushed,
Ford,
594120C-8 Pistons, Forged, Dish, 3.572 in. Bore, Ford, Modular
V8, Set of 8
46620-8 MANLEY Piston Rings, Plasma-moly, 3.572 in. Bore,
File Fit, 1.5mm, 1.5mm, 3.0mm Thickness, 8-Cylinder, Set
156-5001 ARP SIDE MAIN BOLTS
156-5901 ARP MAIN STUD KIT WITH WINDAGE TRAY
156-4101 Cylinder Head Studs, Pro Series, Hex Head, Ford, 4.6,
5.4L, Kit