[Marlboro_Man]

Originally Posted by Marlboro_Man

If I hook the white wire to one of the coil packs, Do I use the common "red" wire , or do I use the other wire which is a differant color for each coil pack?

And

After hooking up the white wire to the coil pack, Do I set up the MSD WS for 1 or 8 cyl mode?

Thanks

I figured it out, You hook the white wire to one of the smaller "colored" wires going to a coil pack.

The red wire that runs to each coil pack is the 12v+ wire. So that would be a nono for the MSD WS.

Also I then set it up for 1 cylender mode.