View Single Post
Old 01-15-2005, 04:36 PM   #8
SVTSnake
Mach Freak
 
SVTSnake's Avatar
 
Join Date: Aug 2003
Location: Pasadena MD USA
Posts: 560
Re: Low gas Pedal fix

This was 1 of the 1st mods that I did to my Cobra's, and was probably the 1st mod I did to the Mach!

As far as opening the butterflies to much, it doesn't! The only real drawback of the mod is getting use to the new height of the pedal! You look like a dork going up the rode for the 1st time as you are giving it to much gas between shifts. Once you get use to it, its sweet!

Cheap, easy mod. I bought a bi-fold closet hardware bag from Lowe's, used the plastic piece that you hammer into the top of the door, cut it to size and used the dremel to make a slit in it to go around the cable. Then just use 1 small worm band and be done with it!
__________________
Gone, but NOT forgotten...

2003 Mach 1 - Zinc Yellow
Born 06/12/03, VIN# 436142
5 Speed, IUP
312 HP, 321 FT. LBS. TRQ. (5/10/05)
SVTSnake is offline   Reply With Quote