[Marlboro_Man]

Originally Posted by lxh89

All of the coil wires lead directly to the ECU. I did this and appears he did too, but we tapped one of these wires on the negative side then configured the Window switch for 1 cylinder mode.

Tony

If I hook the white wire to one of the coil packs, Do I use the common "red" wire , or do I use the other wire which is a differant color for each coil pack?

And

After hooking up the white wire to the coil pack, Do I set up the MSD WS for 1 or 8 cyl mode?

Thanks