Re: Power Window acting up
I've got a really interesting update..
I reinstalled the assembly this time with the window a bit down instead of fully up.
I found exactly what is hitting.
Behind the speaker, there is a vertical track the window goes up and down on shown in picture 1.
I fit my camera in there as shown in Picture 2 and 3, and I can see a white piece that is hitting the metal as i raise the window. This is the issue. In picture 2, you can see it has scrape marks, so it must go under the metal, but i can't budge it in.. when i have the window fully up, and install the assembly, it hits on the top part, but is hidden from view. Same sound.
When i take out the assembly, i have more wiggle room with the glass and can slide the window up and down.
Anyone familiar with this or where i can get more specific advice on this?
Last edited by crazyone64; 05-07-2018 at 08:47 PM.
|