Re: Eaton Swap.....
Quote:
Originally Posted by Mudd92
I dont have any pics but I took a flat piece of alumin, mounted it to the bottom of the shaker alone, drilled 2 holes in the center to blow air ontop of it. And then took measurments of the 3 places I would put bolts in on the SC, and made 2 brackets, mounted to the bottom of the shaker, then ran the tabs and mounted it. Ill try to get pics when I get a chance.
|
Please do thank you
__________________
2004 D.S.G. Mach 1 Mustang I.U.P.(01/22/2004)-04 Cobra Longblock- Posi Ported M122 GT500 Blower - BF 2.93 Upper - 4lb Lower -MGW STS-Bassani cattless X pipe- Borla Stinger Catback-Steeda Bump Steer kit-MM CCs- MM Coilovers 350lb spring- LFP Heat-exchanger- 1inch Shaker Spacer-03 Cobra IRS with FTBR's Full Bushings kit-BF Diff Brace-3:55 gears -T56 Tranzilla- cut 04 coupe rear springs-Viper Remote Start/Alarm system-Ipod Auxilary-SLP LL-Tune coming soon
|