Thread: D1SC issues
View Single Post
Old 12-03-2018, 08:32 PM   #1
D1SC_Mach
Registered User
 
Join Date: Jul 2018
Location: Eagleville
Posts: 8
D1SC issues

Looking to connect with other who have a procharger stage 2 kit with intercooler installed stock pulley.

I'm having some idle stall issues out of the blue, as well as hesitation.

I just had my tranny replaced with a tranzilla from rockland standard gear, along with a McLeod single disk clutch and flywheel (still in breakin process).

I have cleaned the IAC as well as fabricated the "Fix plate" which seemed to work for a while. but since the i got the car back from the tranny shop its kinda been down hill. Its going back to them for a vibration in the rear end as well as some pretty harsh bucking that started to occur after about 110 miles into the breakin. I will let off the gas lightly at almost any rpm and the car wants to buck...in first gear its pretty violent as i can easily wack the gas and thus create a bounce action.

Looking for some suggestions. Im prob going to rip out the MAF, and Mafia puck but that's going to involve taking the front bumper off and what not so that's going to be time sensitive as this is my daily.
D1SC_Mach is offline   Reply With Quote