|
Re: Going to start my port and polish of my intake tonight
Well I think I am pretty much done !! I am going to hit it with the 120 grit flap wheel and call it quits. Before I started I could barely get 2 fingers side by side down the runners. Now they fit with room to spare. The last couple days I was trying to figure out a method to do some slight work inside the radius bend but to no avail. Of course I could go buy a extrude hone machine......
Here are some pics.
Now to duct tape the intake back together and pray for my PHP spacer to be delivered....
__________________
2004 Competition Orange
Build Date 11/04/03
277.1 RWHP 301.2 RWTQ 1/28/04 SAE Stock
294.2 RWHP 314.0 RWTQ 1/25/05 SAE.
12.61@108MPH 04/16/06
Magnaflow Magnapaks,MRT Catted H pipe SCT Xcalibrator tune,Ported/Polished lower intake with PHP spacer,S&B 8" Powerstack filter on Lowes CAI, MGW Shifter, Strange 31 spline axles, FRPP 31 spline diff with carbon fiber clutches, FRPP 4.10 gears,17x9 and 17x10.5 Black FR500 rims, BFG drag radials
|