10. Replace with new unit tapping it in a star pattern to seat it properly.
11. Reinstall Retaining nut, tighten and use your 36mm socket and torque wrench. I've read multiple how- to's regarding the TQ rating and they varied from 246ftlbs to 258ftlbs. I just went and maxed my torque wrench out at 250tqlbs.
12. Reinstall the cap, rotor and caliper assembly holder.
13. Reinstall your caliper, you might need to push the pads and pistons in to fit it over the rotor again.
14. Reinstall wheel, lug nuts, tighten them, lower the car, re-tighten the lugs again. Test drive.
Enjoy!:beer: