|
Re: putting togather a 8-rib set-up
I made my shims in my machine shop at work, I used 1/2" aluminum stock to do it. Keep in mind, I used 4 Reichard Racing idlers, the shims for the 2 idlers directly below the supercharger are longer than the 2 for the idlers closest to the alternator. I read a post somewhere that if you asked Reichard racing they would make the needed spacers for you.
__________________
2003 Azure Mach1 Fully forged shortblock w/ ARP hardware, JAN 05 heads, 8 rib setup IW 10% OD CS, RR 2.90 Pulley, Thump RR tensioner with KB 2.1 @18psi ,Accufab TB;AFCO dual pass HE,SCT X3,FAST 02 meter, Full JBA exhaust,Centerforce DFX Cl, Fidanza al FW, FRPP al. DS, FRPP traction lok rear w/FRPP 3.73 gears and FRPP 31 spline axles, FRPP rear axle girdle, UPR coil overs with tubular K member, Wilwood 6 pis. calipers w/ 2 piece , 03 cobra bumper. DYNO 550/550 16PSI
|