View Single Post
Old 02-19-2008, 08:02 PM   #6
Linumup
Registered User
 
Linumup's Avatar
 
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
Re: Custom Intake Carbureted & Nitrous Setup

Quote:
Originally Posted by Phil View Post
I have always ran a wet nitrous system. This ZEX perimeter plate is a wet system also and yes, this is a much better setup then my factory setup for top end hp and for nitrous. I will be running a 175 NX shot just like last year. This setup is designed to flow fuel and straight into the heads with hardley any chance of puddling, compared to the factory intake. This intake can be setup for direct nitrous port down the road.

I will also be taking more weight off the vehicle by switching to a carb setup and pulling all the EFI components. The shaker/bracket assembly weighs 14 lbs. The factory intake is heavy compared to this intake. I will be going to a plastic foam lined 8 gal fuel cell compared to the steel tank, more weight knocked off. This setup will be unique/different and old school tunning. Then when I have the heads ported & different cams, built motor down the road, is when this setup will really shine.

I just turned over 10,000 miles in Oct, 07..

Sounds quite interesting Phil . Will the computer be able to tune for carburetor ?

Very cool Phil ! Me likes !

No more shaker or hood ?
__________________
1331 RWHP 1296 RWTQ 28 PSI
5.3 liter 322.4 cu.in. Big Bore Stroker
HP PNP Heads w/5 Angle Valve Job
HP Custom Cams
ATI Racing TH400 Cheetah SCS Air Assisted Shifter
Strange 31 spline axles w/3:55
F1R Procharger w/Cog Set-up
Magnafuel 750 -10AN Feed -8AN Return
200 Direct Wet w/MSD window switch & controller
Big Stuff 3 w/Gen. 3 Pro EFI system
Kooks 1.78 LTS 3" Custom Exhaust
Tuning by DGR Racing



DYNO KING
Linumup is offline   Reply With Quote