View Single Post
Old 09-08-2018, 10:17 PM   #3
MAD_MACh1
Registered User
 
MAD_MACh1's Avatar
 
Join Date: Mar 2010
Location: Wyoming, MI
Posts: 425
Re: Bilstein B6 rear shocks installation issue

Quote:
Originally Posted by Hartz4 View Post
I need some help. I am trying to install Bilstein B6 rear shocks in my 04 Mach 1. I have the correct part number, Bilstein tech support confirmed. The stem is not long enough or the bushings are two thick. Tech supports only suggestion is to compress the shock by raising the rear end and let the weight of the car compress the lower bushing. I did this but it did not help. Does anyone have any suggestions? How I can compress the bushing for installation? How can I get these installed?
Have you compared them to what your taking out? If the stud is the same length then the bushings are probably off. If the bushings are the problem you should be able to get replacements at auto parts store. If the stud is short then your pretty much SOL.
__________________
SLP Long tubes and O/R X pipe, Magnaflow cat back, K&N CAI, PHP intake spacer, 01 Cobra intake cam, 4.10s
MAD_MACh1 is offline   Reply With Quote