Re: Front Brakes How to:
1. Take the wheel off…and turn the wheels so that the rear part of the rotor is exposed.
2. Take the C clip (some people call it an E clip) and washer off as shown:
3. Slide the retainer pin off as shown:
4. Slides right off:
5: Raise the caliper from the bracket as shown from the rear:
__________________
Mods
*BRAND NEW 2000 4.6L DOHC COBRA MOTOR w/ T45* 294.18 rwhp and 295.96 rwtq
*MAC catback*H&R Springs*Front Bilsteins, w/ Tokico rear illuminas*8.8 w/ 3.55's*MM CC plates*Subframes*Cobra F&R Brakes*
Last edited by 006; 10-28-2009 at 07:16 PM.
|