[Explosive]

Thats my old car, i would call a couple shops and see if anyone can lengthen the existing cable. If they can all you're going to need to do it pop it back on. Couple things if you go back to a nozzle. First you're going to need a new bracket that mounts to the throttle body and goes over the intake manifold. I wanted to keep everything stock appearing and the stock parts wouldn't fit with the extra width of the plate so i had to cut and weld a small section in to widen it so everything fit as it did stock.

Secondly, i was really unimpressed with the customer service of NX, thats why the plate is nitrous outlet, they're not going to be much help for you either as i had asked this same thing and they were more interested in seeing the bracket i modified as it sounded like i was the first customer to go about adding the plate to a mach and having everything remain stock appearing. Plates are generally more popular, some guys think they hit harder i've not had enough nitrous cars to tell a difference but i do like that its right at the intake i personally feel safer that way regarding puddles and it looks clean. But if you go nozzle again i'd go n20 outlet. But the way that car sits all it needs is that cable lengthened slightly and you're in business again.

I dont get on here too often these days but send me a message if you have a question i'll try and keep an eye out.