|
There are a couple changes you'll need to make to the tune. The A/F should be checked and the transport delay for the O2's needs to be lengthened. Also the duty cycle will need to be raised. I did about 15% for both with my mid lengths.
Use stock gaskets and bolts if you can. I used the factory studs with my Bassanis. It was a pain tightening them, but they stayed tight.
Misspelling brought to you by Tapatalk
__________________
New Ride:
2004 Mystichrome Cobra-Accufab SBTB and plenum, Steeda 2.8" upper, Bassani X, Borla Stingers, Mcleod RXT, MGW shifter, Level 5 halfshafts, chrome FR500's, Stiffler's FIT system and DS safety loop, GT pumps, BA3000, tuned by owner
|