Quote:
Originally Posted by Kove
The connector that's not hooked to anything in your other picture here by the inlet of the blower. Is that it or is that the IAC connector. There's a connector that has to be extended to go to that sensor if I remember correctly.
Sent from my iPhone using Tapatalk
|
Yes, one was for the inlet tube. There is another one, which I have to connect to the boost gauge on my gauge cluster. But I dont have the 03 Cobra cluster.
About the connector, it's not the same connector like the one from the IAC. I had to extend the IAC wire for about 3 inches, for the IAT2 I took the wires from MAF. I also have to extend the wires for the DPFE Sensor for the EGR. But about the one from my pic, I found nothing.