[CMEmach1]

New Numbers with New Setup:

Stock Bottom End: No
Aluminator block, Manley forged pistons 9.2-1 CR, Probe Billet I beam rods
Stock Mach1 Heads, Kooks Long tubes, Accufab TB, Homemade 4" power Pipe, Draw thru setup with SCT BA2400 MAF

Head Unit:
D1SC @ 14psi
4" pulley, IW 10% OD Crank Pulley, 8Rib setup, Thumper Tensioner

Fuel System:
60lb. injectors, stock rails and lines
Twin Aviator pumps in Cobra Hat & Tank
Kenny Bell BAP, Wire upgrade, Stage 2FPDM mod

Tuner: Me, self tuned with SCT Pro Racer,
Breakin Tune 10.7 A/F, 16 deg. timing
410 gears
Pulled it to 6700 but Max hp was at 6100, Max tq was at 4900

STD
RWHP: 562
RWTQ: 516

Corrected SAE
RWHP: 542
RWTQ: 495