2003-04 Mach 1 Registry Owners Club - View Single Post

machgsxr · 12-07-2011, 08:56 PM

ATTT: DANIEL

2r3z6312baa - Crank pulley /Harmonic Balancer
f1az6378a - washer for balancer
f5rz6a340b - bolt for balancer
2r3z10153ca - Bracket that replaces stk. alt. on 99-01 Cobra’s and 03/04 Mach 1’s (Comes w/ pulley below if bought used)
yw7z8678aa - pulley for above bracket
2r3z6b209bc - Pulley bridge assembly for S.C. (If bought new it comes with the bridge, 2 idlers and tensioner)
(8678B) Idler pulley,timing cover pass. side
yw7z8678aa - pulley on drivers side of timing cover
(10A313) Upper alternator bracket
(10153) Lower alternator bracket
(10346) Alternator
1U2Z-14S411-TA Electrical connector (alt. to harmness )
(6B209A) Tensioner on timing cover
2r3z8260ab - Radiator hose
2r3z8a593ab - Radiator hose
2r3z8k576aa - Radiator hose
2r3z8548aa - Water cross over pipe
(6881) Cobra oil cooler adapter
(6A642) Cobra Oil cooler
2r3z9002aa - Cobra fuel tank (optional)
2r3z9h307ab - Cobra fuel pump (optional)
2r3z9424bb - Lower intake
(6K775) Garrett factory intercooler
2r3z9n491ca - Intercooler hard lines that hug the block (If bought new, it comes w/ part # 9l443c)
3r3z9l443aa - Intercooler line that goes from the i/c adapter to i/c res.
2r3z9l443ba - Intercooler line that goes from the i/c adapter to the hard lines that hug the block
2r3z9l443ca - Intercooler line that goes from the hard line against the block to i/c pump(included w/ the hard line that hugs the block if purchased new)
2r3z9l443da - Intercooler line that goes from hard line to hard line
f8yz8501aa - Ford / Bosche water pump for intercooler
2r3z8n500ac - Intercooler pump
2r3z8a193aa - Heat exchanger mounting bracket
2r3z8c386aa - 2each bracket clamps for h/e
(9N491B) Lower manifold to intercooler water adapter
(9B659) Intake tube from maf to t/b.
2r3z9a825aa - Cruise control cable
2r3z9a758aa - Throttle cable
(6C324) PCV tubing
2r3z6020aa - Timing cover gasket LH side
2r3z6020ba -Timing cover gasket middle
2r3z6020ca - Timing cover gasket RH side
2r3z9h486aa - Lower intake to S.C. gasket
2r3z9l437bb - Plenum to S/C gasket
2r3z3490aa - Power steering resevoir bracket.
i/c pigtail
Inner acc 6 rib belt
n80478s309 - (4) coolant crossover and pulley bridge can be picked up at local auto parts store in help section.
n805164437 - (1) Bolt for pulley cage to timing cover.
n808102s437 - bolt that is used on the idlers and pulleys. Only need if you buy parts seperately. You will need a total of at least 6 of these.
n808920s437 - Pulley bridge bolts
n606677-s36 (4) Bolts to bolt the bracket clamps to the h/e bracket
N605909s437 - (4) bolts for the upper alt. bracket
n807274s437 (1) lower alt. bracket to alt bolt

12-07-2011, 08:56 PM	#546
machgsxr Registered User Join Date: Feb 2005 Location: San Antonio Posts: 6,414	Re: Eaton Swap..... ATTT: DANIEL 2r3z6312baa - Crank pulley /Harmonic Balancer f1az6378a - washer for balancer f5rz6a340b - bolt for balancer 2r3z10153ca - Bracket that replaces stk. alt. on 99-01 Cobra’s and 03/04 Mach 1’s (Comes w/ pulley below if bought used) yw7z8678aa - pulley for above bracket 2r3z6b209bc - Pulley bridge assembly for S.C. (If bought new it comes with the bridge, 2 idlers and tensioner) (8678B) Idler pulley,timing cover pass. side yw7z8678aa - pulley on drivers side of timing cover (10A313) Upper alternator bracket (10153) Lower alternator bracket (10346) Alternator 1U2Z-14S411-TA Electrical connector (alt. to harmness ) (6B209A) Tensioner on timing cover 2r3z8260ab - Radiator hose 2r3z8a593ab - Radiator hose 2r3z8k576aa - Radiator hose 2r3z8548aa - Water cross over pipe (6881) Cobra oil cooler adapter (6A642) Cobra Oil cooler 2r3z9002aa - Cobra fuel tank (optional) 2r3z9h307ab - Cobra fuel pump (optional) 2r3z9424bb - Lower intake (6K775) Garrett factory intercooler 2r3z9n491ca - Intercooler hard lines that hug the block (If bought new, it comes w/ part # 9l443c) 3r3z9l443aa - Intercooler line that goes from the i/c adapter to i/c res. 2r3z9l443ba - Intercooler line that goes from the i/c adapter to the hard lines that hug the block 2r3z9l443ca - Intercooler line that goes from the hard line against the block to i/c pump(included w/ the hard line that hugs the block if purchased new) 2r3z9l443da - Intercooler line that goes from hard line to hard line f8yz8501aa - Ford / Bosche water pump for intercooler 2r3z8n500ac - Intercooler pump 2r3z8a193aa - Heat exchanger mounting bracket 2r3z8c386aa - 2each bracket clamps for h/e (9N491B) Lower manifold to intercooler water adapter (9B659) Intake tube from maf to t/b. 2r3z9a825aa - Cruise control cable 2r3z9a758aa - Throttle cable (6C324) PCV tubing 2r3z6020aa - Timing cover gasket LH side 2r3z6020ba -Timing cover gasket middle 2r3z6020ca - Timing cover gasket RH side 2r3z9h486aa - Lower intake to S.C. gasket 2r3z9l437bb - Plenum to S/C gasket 2r3z3490aa - Power steering resevoir bracket. i/c pigtail Inner acc 6 rib belt n80478s309 - (4) coolant crossover and pulley bridge can be picked up at local auto parts store in help section. n805164437 - (1) Bolt for pulley cage to timing cover. n808102s437 - bolt that is used on the idlers and pulleys. Only need if you buy parts seperately. You will need a total of at least 6 of these. n808920s437 - Pulley bridge bolts n606677-s36 (4) Bolts to bolt the bracket clamps to the h/e bracket N605909s437 - (4) bolts for the upper alt. bracket n807274s437 (1) lower alt. bracket to alt bolt Last edited by machgsxr; 12-27-2011 at 04:17 PM.