2003-04 Mach 1 Registry Owners Club - View Single Post

Evn62719 · 05-26-2011, 10:36 AM

Great mod, it works like a charm. I didn't read through all of the replies but for a cammed motor I would suggest going with a 3/8" hole. Mine had a tough time idling with the a/c on and died on me twice after pushing the clutch in to stop with a 9/32 hole.

05-26-2011, 10:36 AM	#262
Evn62719 MarinesMach1 Join Date: Dec 2006 Location: Denham Springs,LA Posts: 467	Re: Hanging/Slow dropping RPM FIX inside. Great mod, it works like a charm. I didn't read through all of the replies but for a cammed motor I would suggest going with a 3/8" hole. Mine had a tough time idling with the a/c on and died on me twice after pushing the clutch in to stop with a 9/32 hole. __________________ P1SC/3.4 pulley,60# injectors, Comp stage 2 blower cams,Cp pistons, Probe rods Beehive valve springs,AFM power pipe,SLP line lock,Cobra tank and pumps,BBK long tubes, o/r x,Magnapacks,T56-26 spline input shaft, MGW shifter,Centerforce DFX, Steeda springs,Steeda H/D UCA's,Metco LCA's,Eaton posi,3.73's,Moser 31 splines, Black 18" FR500's 295/35 BFG drag radials.