Quote:
Originally Posted by txmach302
on the alum driveshaft that works for out stock 3650 when i get a built 3650, will the same driveshaft work? i know i have to change clutch and flywheel but didn't know on this, thanks
ASh
|
Unless you are changing from a 10 spline input shaft to a 26,
no need to change the clutch.
If you ARE changing to a 26 spline input shaft,
FRPP has a clutch for that.
M-7560-T46
"Kit contains 11" clutch disc with 26 spline hub and pressure plate.
Clutch disc with carbon/copper lining on flywheel side and carbon lining on pressure plate side.
Centrifugal assist design pressure plate with 25% more torque capacity then production Cobra.
Used when installing M-7003-R58C and M-7003-R58H transmissions into 1996-04 4.6L Mustangs
with production 11" flywheel or Ford Racing flywheels M-6375-F46, M-6375-G46 or M-6375-R00."