Quote:
Originally Posted by 460hpmach1
but wonded it make a different if he was getting a different pulley than stock.
i would say if you were using stock pulley then take the advice from above and just go to autozone or some parts store and pick up a stock cobra belt and you will be good.
|
He was asking about the second belt, which would be the inner belt since he found the chart that you just posted up with the belt lengths that are affected by the changing of the s/c pulleys and crank pulley. The inner belt is not affected by going to smaller pulleys.
THe only way to affect the inner belt length would be by deleteing the p/s or a/c.