View Single Post
Old 02-22-2009, 05:19 PM   #181
sideways03
LS What?
 
sideways03's Avatar
 
Join Date: Jul 2004
Location: CA
Posts: 2,508
Re: Official Procharger HP/TQ/mods thread:

Quote:
Originally Posted by 04 muscle View Post
The compression ratio was set up for more boost.Tried a smaller pulley on the procharger had belt slippage.What ratio would have been better for 12lbs.
9.5:1 would be best for 12 lbs (considering 91-93 oct). You could be running 14-15lbs with your CR (considering 91-93 oct). Get a new belt & tensioner for the belt slip. Instead of a smaller pulley, try an overdrive crank pulley. You could go 8-rib, but it's not really needed for that level of boost. Considering you have the P1, I would say the overdrive crank is your best bet since you'll be spinning it so fast.

Quote:
Originally Posted by Scott McClure View Post
Doesn't matter. I have 9.0:1 compression and run 25.5 lbs. of boost. You could have run 9.5:1 and even 10.0:1 compression with your Procharger.
Not on pump gas... high comp & high boost will always make the most power... on race gas.
__________________
Black 03 Mach 1
FOR SALE
sideways03 is offline   Reply With Quote