Mac Prochamber Owners Come In
Installed mine a few weeks ago. Initially it leaked like hell on the driver's side so I had to install the reducer that I had to order from Mac. I got mine used and it didn't come with it. I installed it and it took care of most of the leak but it still has a small exhaust tick on the driver's side. Do I need to swap to the Napa studs now too that don't have the steps on them or am I missing something? I never had an issue with my Magnaflow catted x leaking at all that I took off. If this **** prochamber didn't sound so good it would already be swapped back lol.
|
Re: Mac Prochamber Owners Come In
Sorry, I got mine new and didn't have a problem with it.
|
Quote:
Sent from my SM-G930V using Tapatalk |
Re: Mac Prochamber Owners Come In
I had the same problem with my reducer. I ended up sanding the burrs out and slapping on a coat of antiseize to allow it to conform and mate up easier while I used the IMPACT ! No more leakage .
|
I think mine is as tight as it will get. Those **** shoulders on the stock studs are keeping it from tightening snug. I'm nervous about the shop replacing the studs. I hope they don't break one in the process.
Sent from my SM-G930V using Tapatalk |
A little update. New studs are in. Leak is gone. Mechanic had to heat the manifold numous times to get the original studs out but they came out without breaking.
Sent from my SM-G930V using Tapatalk |
Re: Mac Prochamber Owners Come In
Great new, I love it when a plan comes together !
|
All times are GMT -4. The time now is 09:22 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com