Ticking/clicking noise after turning ignition off...
Subject about says it all. I'be let my brake issue (plus having a new born) detract me from messing with the Mach. I went to crank it and I had to jump it off and it jumped right off. I let it set idle for a bit then went to shut it off, I could hear a clickclickclickclickcliiickcliiiickcliiiiiiickclii iiiiii and the battery was dead. It jumped right off again and did the same thing and was dead again. Any ideas?
|
Re: Ticking/clicking noise after turning ignition off...
Well, a new battery did the trick.
After jumping it off one time I decided to leave the jumper cables on and turn the Mach off. It didn't make the clicking noise. And cranked right up. I hit Autozone for a new battery. Put her in and it fired right up and I shut it off without the clicking noise. So far, three more cranks and runs and no issues over the past day. |
All times are GMT -4. The time now is 01:43 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com