MRT StreetSmart CAI help
I recently purchased an 03 AB Mach and it came with a C&L ram air. I also acquired an mrt ss cai but I am missing some parts. The car did not come with the stock MAF housing and the mrt is missing the filter and the nipple that connects the PCV valve hose to the air intake by the TB. I did some research and found the RF-1015 to be the filter and also seen that there was an option for the pro-m maf with the IAT sensor. I also seen that UPR sells a filter that looks to bolt straight on to the air box, is that worth it? Also since my airbox has the hole for the IAT, is that still a relevant add on to get so I can continue to scout those parts? Finally where can I get that air intake to PCV valve nipple or if someone has it can they get me dimensions so I can get something close to it?
I am in the process of restoring the car since it is my daily driver and the previous owner(s) cut the stock springs and it bounces like crazy. The shocks & struts are shot so those are next and I have some tubular A-arms and coilover sleeves currently waiting for the strut funds to be finalized. Also going to replace most front bushings while I am down there since this car just hit 127k miles. This car will mostly see street driving since I plan to preserve it, probably almost no strip trips. Thanks for the help! |
Re: MRT StreetSmart CAI help
1 Attachment(s)
This is how she sits as of now. I have AFS 10.5" rears waiting for grip. Also have an h-pipe waiting till after CA smog since she passed when I transferred her. Oh and MM CC plates also waiting for strut funds.
|
Re: MRT StreetSmart CAI help
Quote:
Scott |
Re: MRT StreetSmart CAI help
1 Attachment(s)
I circled the PCV nipple I was talking about, and it looks like it has a plug on the bottom of it.
|
Re: MRT StreetSmart CAI help
Quote:
|
Re: MRT StreetSmart CAI help
Sounds good thank you! As far as your filter are you using the K&N? Also do you have the Pro-M set up with the IAT?
|
Re: MRT StreetSmart CAI help
Quote:
|
Re: MRT StreetSmart CAI help
Quote:
|
Re: MRT StreetSmart CAI help
The Mach uses an integrated IAT sensor. It's in the MAF already.
Toss the pro m idea and stay with stock stuff. It's a stock car. Don't overthink it. Measure the opening of the filter that's on there and use that dimension to order the next filter. My .02 |
Re: MRT StreetSmart CAI help
Quote:
You make sense. I will stick to the stock MAF. Thanks |
Re: MRT StreetSmart CAI help
Well I got some pvc pipe from the hardware store for the PCV valve hose and it’s not that bad. Also got some bolts to mount the MAF to the air box.
Excuse the dirty engine as she’s a daily and my 3 kids don’t give me time for the Mach. By the way how do you add pics straight from a phone? Keeps telling me error uploading. |
Re: MRT StreetSmart CAI help
1 Attachment(s)
Here is the pic
|
All times are GMT -4. The time now is 10:28 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com