2003-04 Mach 1 Registry Owners Club

2003-04 Mach 1 Registry Owners Club (http://www.mach1registry.org/forums/index.php)
-   Tuning & Dyno Testing/Results (http://www.mach1registry.org/forums/forumdisplay.php?f=9)
-   -   The suspense is killing me.. dyno vid (http://www.mach1registry.org/forums/showthread.php?t=136006)

Vndcatr 06-08-2017 11:01 AM

The suspense is killing me.. dyno vid
 
Well, i finally have been able to get this setup fully tuned. its been a road full of speedbumps to say the least but oh well it was worth it. Sorry i know its not a mach but still my favorite 32v forum so ill post it up. I took the car back to a local tuner who put the basetune on it. I had some issues to work out and they all were fixed so i figured well its time to see what she can do.

In september 2016, the basetune (i call it) was applied and the car was pretty much broken in on the dyno and with tons of issues it made 370rw and a low 310tq. The car ran like a raped ape but the more issues i found i knew the more it was going to need a retune. Fast forward to this week, get the car on the rollers and im told that theyre SCT dyno software is offline and not reporting. LAME!!!:headbang: But, i still want the car tuned so i can deal with no numbers.

The car this time was able to let the tuner put about 24* degrees total timing before showing some signs on the street of detonation. Which makes sense , since out here on the west coast our pump gas is only 91 octane. the tuner knows his **** and is big in the modular/coyote street scene out here so i take his word on opinions. He tells me on E85 itd be a beast but honestly if i have E85 in this car, its gonna have a huge centri on the front of it haha. Anyways the AFR is 12.8-12.9 all the way to limiter and has a wicked pull to it. Now im super anxious to get it to the track and put some time slips under my belt on this setup.:thumbsup: They did say that they would be able to get me the dynosheet in 48-72 hours, but well see.

https://www.youtube.com/watch?v=1B7fEAKYQfo


In case anyone asks..
limiter set at 7200

Built 284ci 11.5cr
Comp stage 3s, degreed
01 cobra heads
roys ported polished mani
full bolt ons and some
Kooks longtubes
etc

TRbetngu 06-08-2017 03:16 PM

Re: The suspense is killing me.. dyno vid
 
Awesome. Any guesses at all?

P.S.- that real wheel/tire fitment is perfect!

311-420 06-30-2017 06:05 PM

Re: The suspense is killing me.. dyno vid
 
I saw the track vid earlier. Impressive! :thumbsup:

Vndcatr 07-05-2017 03:39 PM

Re: The suspense is killing me.. dyno vid
 
Quote:

Originally Posted by 311-420 (Post 1627367)
I saw the track vid earlier. Impressive! :thumbsup:

Ha, thanks! are you on IG?.

311-420 07-07-2017 01:30 PM

Re: The suspense is killing me.. dyno vid
 
Quote:

Originally Posted by Vndcatr (Post 1627460)
Ha, thanks! are you on IG?.

No sir. My Mach is so rare it's difficult to even find it on the internet. Haha

Vndcatr 07-07-2017 02:33 PM

Re: The suspense is killing me.. dyno vid
 
Quote:

Originally Posted by 311-420 (Post 1627478)
No sir. My Mach is so rare it's difficult to even find it on the internet. Haha

haha the only time ive seen a picture of your car is on here in a thread, think the wheel/tire thread im not sure haha.

was this the vid you seen? it def impressed me! im kinda curious what it would do with a sullivan..

https://youtu.be/2Do2ISCKW1Y

311-420 07-08-2017 12:25 PM

Re: The suspense is killing me.. dyno vid
 
Quote:

Originally Posted by Vndcatr (Post 1627483)
haha the only time ive seen a picture of your car is on here in a thread, think the wheel/tire thread im not sure haha.

was this the vid you seen? it def impressed me! im kinda curious what it would do with a sullivan..

https://youtu.be/2Do2ISCKW1Y

Yea it was the 117mph run. Did you ever get a graph?

Vndcatr 07-10-2017 11:14 PM

Re: The suspense is killing me.. dyno vid
 
Quote:

Originally Posted by 311-420 (Post 1627502)
Yea it was the 117mph run. Did you ever get a graph?

No! it irritated me because i wanted to dissect it , but it would have to hit the rollers again for that.

311-420 07-27-2017 06:24 PM

Re: The suspense is killing me.. dyno vid
 
Quote:

Originally Posted by Vndcatr (Post 1627541)
No! it irritated me because i wanted to dissect it , but it would have to hit the rollers again for that.

You've put a lot into your car. Id have to know what the curves looked like if it was me.:eyebrows: A sully may pull a bit harder at the very top, but would it be worth what you'd give up on the bottom end? A dyno might give you some idea...or more track testing

Vndcatr 08-03-2017 12:10 PM

Re: The suspense is killing me.. dyno vid
 
Quote:

Originally Posted by 311-420 (Post 1627838)
You've put a lot into your car. Id have to know what the curves looked like if it was me.:eyebrows: A sully may pull a bit harder at the very top, but would it be worth what you'd give up on the bottom end? A dyno might give you some idea...or more track testing

Yea i do , and im wierd about dyno's so ill go back to where it was tuned at to get that since i know that one is spot on. My brothers and i talked about the sullivan upgrade, and i might do E85(track only) at the same time since im already setup for it. Then upgrade to the 26 spline input and clutch disk and try for a low 11sec slip ..All on non ported 01 heads :D


All times are GMT -4. The time now is 08:26 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com