Re: Wholesale Pricing to M1R members!
 

http://www.fordracingparts.com/parts...tKeyField=7349

"Kit contains 11" clutch disc with 26 spline hub and pressure plate.
Clutch disc with carbon/copper lining on flywheel side
and carbon lining on pressure plate side.
Centrifugal assist design pressure plate with 25% more torque capacity
than production Cobra."

Sounds to me like a Centerforce. (Not a fan)

Re: Wholesale Pricing to M1R members!
 

Yea I just picked up a Ram, wonder what it weighs?

Re: Wholesale Pricing to M1R members!
 

http://upload.wikimedia.org/wikipedi...4.2008_007.jpg

According to a wildlife site, between 90 and 300 lbs.

Re: Wholesale Pricing to M1R members!
 

I would like to know the price for an OEM heater core for a 1986 Mustang 5.0 with ac, shipped to 36618. Thanks.

Re: Wholesale Pricing to M1R members!
 

PM sent.
They are actually available!

Re: Wholesale Pricing to M1R members!
 

Steve,

I need for my 2003 Focus SVT:

Set of SVT pedals
Coolant tank cover (SVT specific)
Ford emblems, front and back
SVT emblem

... sent to 28748, please. Thanks!

Re: Wholesale Pricing to M1R members!
 

Pm sent.
Actually 2

Re: Wholesale Pricing to M1R members!
 

need price for a clutch kits mach1 and cobra for buddys mach1.

Re: Wholesale Pricing to M1R members!
 

Terminator clutch kits are currently on backorder, AGAIN

Re: Wholesale Pricing to M1R members!
 

Steve,

Got my parts today. Thank you very much for the prompt service. I appreciate it and will be ordering from you again.

Re: Wholesale Pricing to M1R members!
 

Dang that was fast.
Thanks for the biz!

Re: Wholesale Pricing to M1R members!
 

Can I please get a quote for Front and rear pads shipped to 19015?

Thanks.

Re: Wholesale Pricing to M1R members!
 

$150 shipped for front and rear Genuine Ford pads.
PM me if you want a set.
CC or PP are accepted.

Re: Wholesale Pricing to M1R members!
 

The new 2011 FRPP catalog can be downloaded HERE
Parts updates,
FR500 steering wheel is on backorder,
if and when they return, that's it, they will be discontinued.

FRPP Modular/Aluminator short blocks are being discontinued

Still no cams for 4V (plenty for pushrod motors though)

No oil pans for us (plenty for pushrod motors though)

No valve/cam covers for us either
(Everyone else gets them, even B head motors though)

4.6 forged crankshafts?
"While supplies last" then they go away
(plenty for pushrod motors though)

That neat 10th anniversary faux CF shift boot? Buh bye!

Still available parts for Mach 1's are literally going up 10% per month
Get stuff while you can. It is not going to get cheaper.
Don't say I didn't give you a heads up!

Re: Wholesale Pricing to M1R members!
 

thats just sad that the prices are going up and they aren't making some of the parts. i would figure that people are buying so why are they cutting down on diff stuff. just doesn't make sense. makes me sad

ASh

Re: Wholesale Pricing to M1R members!
 

It costs $$ to keep around inventory that has a limited buying base. There are some parts on the '01 Bullitts now that are in a similar situation, given these cars are now almost 10 years out of production.

Re: Wholesale Pricing to M1R members!
 

Which explains why a power door lock actuator is available for Fox chassis cars,
sure, they are 190 bucks, but you can get them.
It has seemed to me for quite some time that Ford and FRPP
could not care less about the modular 4V motors.
I guess that is only fair,
as I could not care less about pushrod and 3V motors. :confused:

Re: Wholesale Pricing to M1R members!
 

well it is what it is. so be it

ASh

Re: Wholesale Pricing to M1R members!
 

Discontinued for 2011 parts:

FR500 steering wheels are discontinued and gone
FGT wet sump blocks are gone, dry sump "while quantities last".
Aluminator SC bare blocks are gone
Aluminator NA bare blocks are no longer listed
FGT heads are gone, replaced by Shelby heads
Cobra brake calipers GONE
Fox body ft. LCA's GONE
Axle shafts (all from 79-04) GONE
Happy New Year :smokin:

Re: Wholesale Pricing to M1R members!
 

Is it true that GT cams are discontinued also?

Re: Wholesale Pricing to M1R members!
 

FGT cams are gone, but Joe might have a set.

Re: Wholesale Pricing to M1R members!
 

need fuel filler tube for 1999 Mustang v6 to zip 45439 (looks like part 9034 on diagram from Ford, I already bought rubber gromet 9072 [2R3Z-9072-AA] for $19). Thanks, Howard

Re: Wholesale Pricing to M1R members!
 

what are 5.8 short blocks for a 96 bronco going for these days?

Re: Wholesale Pricing to M1R members!
 

PM sent

Nothing 5.8 based from FRPP except THIS,
Ford number F4TZ-6009-ARM is discontinued.

Re: Wholesale Pricing to M1R members!
 

Steve, Could you price for me the NA Aluminator Longblock shipped to 23455

Thanks, Ray