Starting my Build
So I've been gathering parts for the past 6 months and now it's time to get things moving.
Parts I have so far: Used Mach block with crank Manley .020 over flat tops w/ rings 2013 Boss Rods ARP hardware 98 Cobra Cams A set of Ported C Heads (supposedly stage 2 livernois heads but can't confirm) Once I get my Billet oil pump I will be sending the block to the builder. |
Re: Starting my Build
1 Attachment(s)
Pic of a couple parts.
|
Re: Starting my Build
Drool... Looks sweet! whats the final goal for the car?
|
Re: Starting my Build
My goal is to have a mid or low 10 second street car.
It will be making around 450 at first. Then once I get a return style fuel system and bigger blower I will be expecting 600-650hp on E-85. |
Re: Starting my Build
good luck and have fun.
|
Re: Starting my Build
Thanks man. Can't wait to turn up the boost.
|
Re: Starting my Build
1 Attachment(s)
|
Re: Starting my Build
Quick update. Just ordered a MMR Hurricane oil pump. And tomorrow I plan on disassembling the rods and pistons from the used block. :yes:
|
Re: Starting my Build
Just bought an engine stand from Harbor Freight. Now time to mock up the old motor and remove the rods and pistons.
|
Re: Starting my Build
Sweet. Post pics as you go bro. Gonna have to up my game to keep up with you.
|
Re: Starting my Build
Every time I try and post a picture it says "You already uploaded this picture"????? I don't know whats going on with this thing!
Shakn, time for you to start building that mofo. I know you got a teskid block laying around.lol |
Re: Starting my Build
1 Attachment(s)
|
Re: Starting my Build
|
Re: Starting my Build
|
Re: Starting my Build
The crank has a little scar. Hopefully the machine shop can take care of it.
https://lh3.googleusercontent.com/-O...25285%2529.jpg |
Re: Starting my Build
|
Re: Starting my Build
1 Attachment(s)
Not to sure I you guys are going to be able to the pics.
Lets see if this works. |
Re: Starting my Build
Freakin government computer :grr:, I can't see any of the pics and I have been around since 11 PM, hopefully crank will clean up for you..great thread and good luck!!
Note: I could see the last one (thumbnail). |
Re: Starting my Build
Ok, thanks for the heads up. Now I know what works
|
Re: Starting my Build
I cannot see most of your pics, link to google mail is what happens. The attached ones has a broken link to the thumbnail but I can click on those and view them.
I put all my pics in Google+ under photos, then make the folder than I am sharing as 'public' but just that folder. Then I open the pics, right click and select 'copy image address' then I past this into the 'insert image' button/box. Like: https://lh4.googleusercontent.com/-M.../help+copy.jpg https://lh3.googleusercontent.com/-G...o/IMG_1188.JPG |
Re: Starting my Build
Thanks TKat. Think I got it figured out.
|
Re: Starting my Build
|
Re: Starting my Build
A word of advise :wall:...If you don't want to see the same damage to youre current crank again...Throw that MMR oil pump in the trash ,get a real pump get a melling pump.
|
Re: Starting my Build
you mean you have had a MMR pump fail on you....lol..:3:
|
Re: Starting my Build
Sort of..I went to install the MMR pump I got in a 2 for one deal. I decided to just check inside the pump to make sure it was clean. When I removed the cover a small sliver of metal was caught in gear and the housing. I called MMR and wanted them to replace it ,they said no , since I had opened it up! I called Melling , ordered a pump and threw the MMR in the round file !
|
All times are GMT -4. The time now is 02:29 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com