Mach Dyno 8-18-13 (untuned)
 

Put my Mach on a mustang Dyno today at ivy tech school. It is still un-tuned for WOT.

Pulls was made in 3rd gear. Don't ask why. The instructure made everyone pull in 3rd gear.

Car made 346. I believe on a Dynojet in 4th gear with the tune finished, it should make a higher number.

http://youtu.be/0bIsK0rBbM4

Re: Mach Dyno 8-18-13 (untuned)
 

awesome! be sure to post up the numbers after the tune. who will be tuning it btw?
also, do you know someone at ivy tech or something or do they let people do dyno runs whenever?

Re: Mach Dyno 8-18-13 (untuned)
 

Using a guy named Ed who lives in Alabama. The school did free Dyno rus as part of their class program. Last night was the last night for it.

Re: Mach Dyno 8-18-13 (untuned)
 

346!? mods??

jeff

Re: Mach Dyno 8-18-13 (untuned)
 

They're in the description on the video.

Re: Mach Dyno 8-18-13 (untuned)
 

This may help
http://www.mach1registry.org/forums/...d.php?t=126536

Re: Mach Dyno 8-18-13 (untuned)
 

Went to the track today to get a feel for the car. Still haven't gotten a wot tune yet. Car had a Full tank of gas and of course it was hot and humid today. My goal was to get it in the 7's. it took me 6 passes to get it there. Still learning what these NA 4v's like. Totally different from my other 4v.

It will go deeper once I get a tune, and a little cooler weather. Hoping for 7.70's or 7.60's at Nara in bowling green come fall.

http://youtu.be/kCzmSc4-4ts

Re: Mach Dyno 8-18-13 (untuned)
 

got it, awesome N/A #'s!

Re: Mach Dyno 8-18-13 (untuned)
 

Had the mach retuned today. I was having some drivability issues so I tried another tuner. Lee at Blankenship did a great job.
All numbers are corrected for weather.
On 93 octane it made 380 rwhp and 350 rwtq
On e85 it made 386 rwhp and 356 rwtq
Car still has a stock unported intake

Car runs and pulls great

Run 1 = 93 octane
Run 2 = e85

http://i68.photobucket.com/albums/i2...psmfinrje6.jpg

This is the last Dyno graph

http://i68.photobucket.com/albums/i2...ps03d90279.jpg

Re: Mach Dyno 8-18-13 (untuned)
 

Did you run 11.79 on this tune?
What's your mod list?

Nice numbers. What gears are you running? I'm curious since I'm running similar track times but at 90mph. I only dyno'd at 316whp sae. Are you at a high altitude?


Sent from my iPhone using Tapatalk

Re: Mach Dyno 8-18-13 (untuned)
 

No that was in the old tune.
Mods are rebuilt motor, cams, intake spacer, longtubes, 39 lb inj, 03 cobra pumps, sct2800 maf, and jlt rai intake

Re: Mach Dyno 8-18-13 (untuned)
 

4:10 gears with 27" tire.
I am not at a high elevation. My track times were on the old tune.

What are your times?

My best time was an 8.0@90mph with a 1.9 60ft, I've always had traction problems. My mods are in the sig. The only difference is my gears were 4.30's not 4.10's. I was on a 26.5" tire. With a better 60ft I could have easily been in the 7's


Sent from my iPhone using Tapatalk

Forgot to add. I had no rear seats and a gutted trunk. With full interior I average 87/88mph


Sent from my iPhone using Tapatalk

Re: Mach Dyno 8-18-13 (untuned)
 

On my old tune I went 7.48 in the 1/7 and 11.79 in the quarter with a 1.61 sixty foot
Hoping for 11.50's now

Re: Mach Dyno 8-18-13 (untuned)
 

Just for reference, Modularspeed (Kelly) did a comparison of third and 4th gear pulls and 3rd gear made 20rwhp less. I have the dyno sheet at work and will post it when I get back next week.

Re: Mach Dyno 8-18-13 (untuned)
 

my buddy's 96gt did the same 20hp less across the board in 3rd vs 4th