Re: What to do to get 300 rwhp on a Mach 1
 

Is there anyway to tell if my car its tuned or not? I just bought it a month ago and have not done anything to it yet...I know it came with K&N intake and mbrp exhaust...I cannot find that exhaust anywhere online so i didnt know if it was stock piping with just new tips and new mufflers....here is the exhaust note, i know it is the stock h pipe...
http://www.youtube.com/watch?v=B5ZC9frjFwg
also here is my 0-80...
http://www.youtube.com/watch?v=vZv5Zbb0_9w
dont know if that helps at all but thanks!!

Re: What to do to get 300 rwhp on a Mach 1
 

How did you get the odometer to read what the tach is putting out?

Re: What to do to get 300 rwhp on a Mach 1
 

its in the "how to's" section...its just the digital onboard diagnostic...you can scan for codes, show digital tach or speedo, shows oil pressure amongst other things as well....its really simple to do.

Re: What to do to get 300 rwhp on a Mach 1
 

Thank you! :worship:

Re: What to do to get 300 rwhp on a Mach 1
 

^ I looked and couldn't find it.

Re: What to do to get 300 rwhp on a Mach 1
 

http://www.mustangworld.com/ourpics/fcar/dtcodes.htm

here you go fellas

Re: What to do to get 300 rwhp on a Mach 1
 

an off road x-pipe super 44 flowmasters a diablo sport tuner and i ran a 13.002 somethings up :3amin: i think you should invest in some better tires and suspension. i recomend a 16 inch wheel with some mickeys and some coilovers preferably eibach

Re: What to do to get 300 rwhp on a Mach 1
 

intake, full exhaust, 4.10s, tires.. guy hit 12.1 @ 112.. that's impressive. I'm sure he isn't making anymore then 320rwhp and I'm almost certain he was a member on this forum before he sold the car: http://youtu.be/wG2-a95xKiI

Re: What to do to get 300 rwhp on a Mach 1
 

this run wasn't bad either.. he's a well known member on this forum. http://youtu.be/hRJL-2sWh7Y

Re: What to do to get 300 rwhp on a Mach 1
 

I made 306/327 sae and 315/336 std. I have mods in sig, gears not installed yet.

Re: What to do to get 300 rwhp on a Mach 1
 

I need to go have mine dynoed. It already had MAC Headers, lethal performance high flow catt'ed X pipe, Magnaflow Magnapac cat baacks. It was also costumed tuned by Bamma after putting in a the JLT coldair/ramair kit. With those mods what should I be making at the dyno? Any help would be nice, don't really want to go and pay to have it dynoed just to get an idea.

Re: What to do to get 300 rwhp on a Mach 1
 

Probably around 300rwhp sae on a dyno jet


Got any sound clips of the exhaust? That's going to be my exact combo in the near future.

Re: What to do to get 300 rwhp on a Mach 1
 

My mods are in my sig. I made 315/336 with a decent amount of bolt ons, the 65mm TB wasn't on the car when it was dyno'd.

Re: What to do to get 300 rwhp on a Mach 1
 

thanks guys, Ill put up a good sound clip soon

Re: What to do to get 300 rwhp on a Mach 1
 

Just went over your sig, what do you think i should do next then? I want those numbers

Re: What to do to get 300 rwhp on a Mach 1
 

Cats are causing you a few ponies, an intake spacer should help some, then a LMAF 90mm and a 62 or 65 MM TB would be a nice addition. Then after that get a custom tune from a popular shop. Then strap some 4.30-4.56's with a tire on and have fun.

Re: What to do to get 300 rwhp on a Mach 1
 

I'm trying to upload a sound clip but it won't let me do it. It was just me hanging my iphone out of the window though haha. I'll try and make a better one and email it to you or if you have an iphone pm your number and I'll send you a video. I've drive a lot of Mach's and a ton of mustangs and i gotta say, in my humble opinion the Mach 1 engine with my set up is hard to beat

Re: What to do to get 300 rwhp on a Mach 1
 

Heres was my mod list for both dyno numbers.

Bolt-on #'s- 329/338 std (if someone wants to convert to sae then go for it)
Mods: mac lts, o/r x, jlt rai, slp cb, sct tune.

Cammed/Bolt-ons- 366/340 std (again covert to sae if wanted)
Mods: mac lts, o/r x, jlt rai, slp cb, comp cams 106100's, roys ported full length runner intake, sct tune.

http://i1064.photobucket.com/albums/...-48-13_414.jpg

Re: What to do to get 300 rwhp on a Mach 1
 

IPhone hanging out the window. Lol. Thanks for trying man. I'm sure it sounds great.

Did you upload it to an account like photobucket? If so, you could paste the link here and go that way.

Feel free to pm me a video or link to a video. Thanks again.

Re: What to do to get 300 rwhp on a Mach 1
 

Did you ever get tho's runfiles?

Re: What to do to get 300 rwhp on a Mach 1
 

No sir, im going back for a re-tune on 16* timing with 3lbs more of boost. When i go back, ill get them from them when im there. Wont be there for a few months but when i am, ill surely get them.

Re: What to do to get 300 rwhp on a Mach 1
 

Whats up with the lines that look like the rocky mountains in the dyno graph? lol

Re: What to do to get 300 rwhp on a Mach 1
 

lol dunno, but those rocky mountains were hard for other cars to climb :smokin:

Re: What to do to get 300 rwhp on a Mach 1
 

didn't even realize this til now but im from monroe LA, i was there a month ago and versus utah, way easier to keep my Mach clean. too much **** dust and pollution here. We need to get our Saints in hear man, go get dem in the *** for me

Re: What to do to get 300 rwhp on a Mach 1
 

Just dynoed and got 305hp and 310torque!!!! And I did it above 4000 feet