2003-04 Mach 1 Registry Owners Club - What to do to get 300 rwhp on a Mach 1

Page 5 of 9

Show 50 post(s) from this thread on one page

2003-04 Mach 1 Registry Owners Club (http://www.mach1registry.org/forums/index.php)

- Tuning & Dyno Testing/Results (http://www.mach1registry.org/forums/forumdisplay.php?f=9)

- - What to do to get 300 rwhp on a Mach 1 (http://www.mach1registry.org/forums/showthread.php?t=24951)

Charles236

11-01-2007 03:48 PM

Re: What to do to get 300 rwhp on a Mach 1

I had my Mach tuned yesterday by Rick at Amazon. With an MRT off road H-pipe, FR500 cat-back, PHP spacer and PHP cold air kit, and Meziere electric water pump, final numbers were 302.5 hp and 313 ft/lbs. Rick uses a Mustang Dyno and on my car he used a Sniper programmer to flash in the new tune. The IRS, 4.10 gears and 18" wheels absorbed a few horsepower, but I am pleased with the numbers, and especially the driveability improvement.

WOODSMACH1

11-05-2007 11:05 AM

Re: What to do to get 300 rwhp on a Mach 1

Finally made it to the dyno..

04 Mach 1
Mac off-road pipe
Flowmaster cat-back
SCT Tuner
K & N Filter
4:10 Gears

305 hp/328tq

Car is running lean though. Need to have air/fuel fixed.
was around 13.8 air/fuel

Shinigami

06-10-2008 04:48 PM

Re: What to do to get 300 rwhp on a Mach 1

K&N intake, PHP spacer, Stinger catback, BBK cattedX, SCT dynotune:

300/332 on a mustang dyno.

ponygt65

06-10-2008 06:24 PM

Re: What to do to get 300 rwhp on a Mach 1

Quote:

Originally Posted by WOODSMACH1 (Post 887859)

Quote:

Originally Posted by Shinigami (Post 1005989)

K&N intake, PHP spacer, Stinger catback, BBK cattedX, SCT dynotune:

300/332 on a mustang dyno.

THose seem really high. Especially for mustang dyno and lean A/F. I tink da tuner like to inflate numeros. LOL

Fresh tune ups before those runs?

305HP

06-11-2008 09:05 AM

Re: What to do to get 300 rwhp on a Mach 1

Quote:

Originally Posted by ponygt65 (Post 1006046)

THose seem really high. Especially for mustang dyno and lean A/F. I tink da tuner like to inflate numeros. LOL

Fresh tune ups before those runs?

Shinigami's car runs 12.8 a/f, and 28* timing, I watched Jon Lund tune him in at Evolution. He MIGHT be at 15k on the clock now. haha

icutice2

07-11-2008 07:30 PM

Re: What to do to get 300 rwhp on a Mach 1

Quote:

Originally Posted by southbeachmach1 (Post 251332)

Well I have done a few mods and have done my best to dyno after each mod or group of mods to see what the gains were and my last dyno put me at 301 rwhp and 319 rwtq.

Bone Stock = 266 hp

Bassani SS Offroad X-Pipe and Catback K&N Air Filter (Drop In) = 283 hp

SCT Custom Chip = 292 hp

PHP Intake Spacer and JLT RAI = 301 hp

Also noteworthy, its not all about the peak HP/TQ, on the curve there are some areas of significant gain from mod to mod.

I just thought this might help some of you who might be questioning as I did what mods make the most difference. By far the exhaust/K&N was the single largest gain so far. Like many of you I hate spending money on stuff that doesn't help the car, or causes a loss in power. What a waste.

I play with alot more power than that, but sounds like you hit the mark you want and congrats on the 300 club. The questions is how much more do you want.......:wings:

JL.Tuning

07-28-2008 12:21 PM

Re: What to do to get 300 rwhp on a Mach 1

SAE 310hp 331 Trq
bought the car wednsday barrowed my friends dyno and tuned it saturday.
Offroad H-pipe W/JLT CAI and Diablo CMR Tune By Me. AFR is not as stable as I wanted, JLT filter adapter is meant for a 90mm MAF and is on the stock 80 creating turbulence.
http://www.mach1registry.org/forums/...6&d=1217262053

ponygt65

07-28-2008 06:16 PM

Re: What to do to get 300 rwhp on a Mach 1

Quote:

Originally Posted by 305HP (Post 1006263)

Shinigami's car runs 12.8 a/f, and 28* timing, I watched Jon Lund tune him in at Evolution. He MIGHT be at 15k on the clock now. haha

(old reply I know...but didnt' see it until now). Well, John Lund is one of the best, and that A/F is perfect.....SAE or STD numbers?

Quote:

Originally Posted by JL.Tuning (Post 1025310)

VERY NICE power. I'm dig'n the band too....SAE corrected too.

SHOW SOME

07-31-2008 10:02 PM

Re: What to do to get 300 rwhp on a Mach 1

I have pretty much the same set up only difference is the exhaust. mac pro chamber off road and slp loud mouth. spacer, intake, and tuner are the same, and i got 308 rwhp and 334rwtq.

marshall04mach

08-01-2008 10:00 PM

Re: What to do to get 300 rwhp on a Mach 1

Kooks Longtubes
Kooks O/R X Pipe
SLP Loudmouth 1 Catback
PHP Intake Spacer
K&N Filter
SCT Tuner

put down 336 RWHP.

marshall04mach

08-01-2008 10:31 PM

Re: What to do to get 300 rwhp on a Mach 1

Quote:

Originally Posted by Mach1Marauder (Post 1027426)

STILL no dyno sheets!:smack:

blow me. its 336 whether you believe me or not

marshall04mach

08-01-2008 10:45 PM

Re: What to do to get 300 rwhp on a Mach 1

Quote:

Originally Posted by Mach1Marauder (Post 1027436)

Stop being GAY and NO ONE with any sense believes you!:smack:

yeah cause 336 is soo unbelievable for those mods?

marshall04mach

08-02-2008 01:08 AM

Re: What to do to get 300 rwhp on a Mach 1

Quote:

Originally Posted by Mach1Marauder (Post 1027443)

It IS!:smack:

Then i guess you don't know as much as you think you do.

oneil2187

11-24-2008 01:03 PM

Re: What to do to get 300 rwhp on a Mach 1

finally got my car on a dyno
got 290 with a K&N intake and prochamber
looks like im a spacer and a tune away from 300

<a href="http://s67.photobucket.com/albums/h294/oneil2187/?action=view&current=dyno.jpg" target="_blank"><img src="http://i67.photobucket.com/albums/h294/oneil2187/dyno.jpg" border="0" alt="Photobucket"></a>

Mike1284

11-24-2008 01:29 PM

Re: What to do to get 300 rwhp on a Mach 1

my old one put down 297rwhp with just an o/r mid pipe

JDraper

11-24-2008 04:47 PM

Re: What to do to get 300 rwhp on a Mach 1

Quote:

Originally Posted by oneil2187 (Post 1075796)

finally got my car on a dyno
got 290 with a K&N intake and prochamber
looks like im a spacer and a tune away from 300

Spacer won't add any hp or torque. Just fattens the curves.

03machstock

11-24-2008 08:05 PM

Re: What to do to get 300 rwhp on a Mach 1

Quote:

Originally Posted by marshall04mach (Post 1027439)

yeah cause 336 is soo unbelievable for those mods?

Yea if you put down like 315 stock hahaha.

Apollo240

11-25-2008 08:16 AM

Re: What to do to get 300 rwhp on a Mach 1

Quote:

Originally Posted by 03machstock (Post 1075993)

Yea if you put down like 315 stock hahaha.

Those mods 336 at the crank is kinda hard to believe

everything in my sig minus the spacer i made 283/302 rear wheel.

Mach1Man04

11-26-2008 12:46 PM

Re: What to do to get 300 rwhp on a Mach 1

the shop i use had a dyno day sunday and i threw down about 310 with only the mods in my sig. on a mustang dyno needless to say, alot of ppl were shocked including me lol the told me i might even lose power with a tune

All times are GMT -4. The time now is 06:59 PM.

Page 5 of 9

Show 50 post(s) from this thread on one page