cut springs with longtubes
I got a real good deal on a set of long tubes and since I will be removing the k member, i would also cut the stock springs just to get rid of the 4x4 look. How much can be cut before needing camber bolts? Also will attempt 96-98 intake cam swap as well (I will have two weeks off before retiring from military soon).
|
Re: cut springs with longtubes
Quote:
|
Re: cut springs with longtubes
I cut front 3/4 coil for 1 inch drop and rear 1/2 coil for 3/4 drop. I used camber bolts which were needed, no idea how much less would not need it.
|
Re: cut springs with longtubes
did it still ride the same?
|
Re: cut springs with longtubes
You may notice a few more bumps than before but after a week or so its feels normal to you.
|
Re: cut springs with longtubes
what long tubes? some hang lower than others
|
Re: cut springs with longtubes
bbk with no cats
|
All times are GMT -4. The time now is 07:34 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com